MANATEC JUMBO HCV, Руководство по эксплуатации

Страница: 68 / 135

Ref.: MEL-WA(3D HCV) - OM Ver.1.7
63

After achieving the F2 Toe, adjust the Drag link to make
adjustment of differential Toe as guided by the screen. After
achieving the differential toe to zero, now tighten the Drag link
pinch clamps.
Fig. 111

After adjustment of F2 Total toe & Differential toe, press NEXT
button go to Parallelism Adjustment screen. After achieving
the differential toe value of F2 axle to zero, the parallelism value
will become zero.
7.4.4.5.
PARALLELISM ADJUSTMENT
Press NEXT button to adjust the Parallelism . The Parallelism
screen will display the F1 straight position, F2 Front axle Toe values
and the present parallelism condition of the F1 & F2 axles as shown
below:
Fig. 112

Steer the Steering wheel to reach the F1 straight position.

Adjust the F2 Toe values to the required specification & lock it.

After achieving the F2 Toe, adjust the Drag link to make both
Axles parallel as guided by the screen. After achieving the
parallelism to zero, now tighten the Drag link pinch clamps.
Fig. 113