manualshive.com logo in svg

Man D2842 LE103, Руководство по эксплуатации

Поделиться
Скачать
Man D2842 LE103 Скачать руководство пользователя страница 57

Maintenance and Care

MAN-Industrial diesel engines D2842 LE103

57

Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions 
and the safety instructions in each of the chapters.

8.4.5

Bleeding the Fuel System

DANGER!

Fire hazard caused by uncontrolled fuel leakage

When opening the fuel system, fuel can leak out uncontrolled.

For this reason:

S

Work carefully.

S

Do not spill any fuel.

The filter head has an arrow marking the direction of fuel flow.

1. Switch on ignition.

2. Unscrew bleed screw (1) of first filter in the di­

rection of flow by two turns.

3. Unscrew plunger (2) of hand pump.

4. Operate plunger (2) of hand pump until fuel

exits from the bleed screw (1) with no bubbles.

5. Tighten bleed screw (1).

Tightening torque

25 Nm

. . . . . . . . . . . . . . . . . . . . . . .

6. Unscrew bleed screw (1) of second filter in the

direction of flow by two turns.

Repeat steps 3-5 for second filter.

7. Screw on plunger (2) of hand pump again and

tighten.

8. Check fuel system for leaks.

1

2

Содержание D2842 LE103



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды