Man D2842 LE103 Скачать руководство пользователя страница 21

Страница: 21 / 90

General Safety Instructions

MAN-Industrial diesel engines D2842 LE103

Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.

2.9

Conduct in Dangerous Situations and When Accidents Occur

Preventative Measures

Always be prepared for an accident!

Keep first aid equipment (first aid kit, blankets, etc.) and fire extinguishers at hand.

Check first aid equipment and fire extinguishers regularly for completeness and proper operation.

Familiarise the personnel with the emergency, first aid and rescue equipment.

Carry out regular instruction on safety measures.

Always keep access lanes for rescue vehicles free of any obstructions.

In the case of an accident: Act accordingly

Remain calm.

Immediately shut down engine using the emergency-off button.

Start first aid measures.

Alert rescue services and/or fire department.

Move people out of the danger zone.

Clear access lanes for rescue vehicles.

Inform the person in charge.

CAUTION!

Accidents despite preventative measures

If an accident occurs, e.g. from one of the listed points below, despite all of the preventative
measures, contact a physician immediately.

Contact with caustic acids.

Penetration of fuel into the skin.

Scalding by hot oil or coolant.

Antifreeze sprayed into the eyes, etc.

Содержание D2842 LE103



























































































Результаты поиска

Содержание D2842 LE103

Отзывы:

Бренды по названию

Популярные бренды

Man D2842 LE103, Руководство по эксплуатации

Результаты поиска

Содержание D2842 LE103

Отзывы:

Бренды по названию

Популярные бренды