6
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):
Designation of Machine: Petrol Edger
Model No./ Type: EE2650H
Speci
fi
cations: see “TECHNICAL DATA” table
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or standardized documents:
EN ISO 11789
The technical documentation is kept by our authorized representative in Europe who is:
Makita International Europe Ltd.,
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 98.4 dB
Guaranteed Sound Power Level: 101 dB
2. 7. 2013
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
Never straighten or weld damaged cutting tools.
Pay attention to the environment. Avoid unnecessary throttle operation for
–
less pollution and noise emissions. Adjust the carburetor correctly.
Clean the equipment at regular intervals and check that all screws and nuts
–
are well tightened.
Never service or store the equipment in the vicinity of naked
fl
ames.
–
Always store the equipment in locked rooms and with an emptied fuel tank.
–
When cleaning, servicing and storing the equipment, always remove the
–
cutting tool.
Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.
Do not perform any modi
fi
cations to the equipment as this will endanger your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is
to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by MAKITA.
Use of non-approved accessories and tools means increased risk of accidents.
MAKITA will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and
fi
xing devices of cutting tools,
or accessories.
First Aid
In case of accident make sure that a
fi
rst-aid box is available in the vicinity of
the cutting operations. Immediately replace any item taken from the
fi
rst aid box.
When asking for help, please give the following
information:
Place of accident
–
What happened
–
Number of injured persons
–
Kind of injuries
–
Your name
–