S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 51
Figure 4-22 Install the QSFP+ module
Before installing the fiber, do not pull out the dust plug on the QSFP+ module.
It is recommended not to insert the QSFP+ module with the fiber into the interface slot
directly. Please install after unplugging the fiber.
C o n n e c t F i b e r o n O p t i c a l M o d u l e
Step 1:
Wear the anti-static wrist and confirm that the anti-static wrist is well contacted
with the skin and well-grounded.
Step 2:
Remove the dust cap of the fiber connector.
Figure 4-23 Remove the dust cap of the fiber
Step 3:
Remove the dust cap of the QSFP+ module
Figure 4-24 Remove the dust cap of the QSFP+ module
Step 4:
Insert the prepared fibers to the ports of the optical module in order
