S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 33
Step 3:
Push the power module until the snap locks with the chassis.
3.1.8 Arrange Cables
After the service modules on the slots are connected with the cables, the cables go out from
the corresponding cabling rack of the slot, as shown in Figure 3-13.
Figure 3-13 The diagram of arranging the cables of the service cards
After the power cable is inserted to the power module, it is necessary to bind the power cables
to the fixed location via the cable tie, so as to prevent the cable plug from falling off.
Figure 3-14 The diagram of binding the po
wer cables
