Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
16
of
124
Link Aggregation
Troubleshooting
Main contents:
z
Basic idea of link aggregation troubleshooting
z
Common link aggregation
troubleshooting
Basic Idea of Link
Troubleshooting
1.
Analyze the link group status:
Checking method: Use the show port command to view whether the
member ports of the link group all become up and check whether the
cables are normal, whether the device is normal, and whether the
environment has the bad influence for the link aggregation.
2.
Check whether the status of the link group is normal and whether the
configurations and parameter setting are correct.
Checking method: Use the show link-aggregation group command to
view the status of the link aggregation; use the show link-aggregation
port command to view whether the member port status is normal; use the
debug lac command to locate and remove the fault.
Common Link Aggregation
Troubleshooting
Fault 1: The link groups between two devices cannot aggregate
successfully.
