Maipu MP1800X-40, Руководство по установке

Страница: 21 / 65

MP1800X Series Router
Installation Preparation
copyright

2017Maipu, all rights reserved
2-7
Caution:

For safety sake, please check the resistance of the ESD wrist. The resistance
between human body and ground shall be 1-10 megohm.
The steps to use the ESD wrist are as follows:
Step 1: Put your hand into the ESD wrist.
Step 2: Pull tightly the lock catch and ensure that the sheet metal of the ESD wrist well contact
with your skin.
Step 3: Insert the anti-static wrist into the anti-static wrist jack on the router chassis or clamp the
alligator clip of the anti-static wrist to the grounding pole of the router.
Step 4: Ensure that the ESD wrist is well grounded.
Refer to Figure 2-1 for the specific usage of the ESD wrist.
Figure 2-1 Usage of the ESD wrist
2.3
Installation Tools, Instruments, and Equipment
Tools:

Phillips screwdriver

Anti-static wrist

Paper knife
Cables:

PGND cable and power cable

Console cable