Maipu MP1800X-40, Руководство по установке

Страница: 26 / 65

Router Installation
MP1800X Series Router Installation Manual
3-4
copyright

2017Maipu, all rights reserved
Figure 3-4 The minimum height of the tray
The following describes how to install a tray to the 19-inch standard cabinet.
The installation steps of the tray are as follows:
Step 1: Ensure the installation position of the tray on the cabinet and mark the installation hole
position using a marker.
The space height above the tray must be larger than the to-be-installed router chassis
height and enough margin is reserved (1U margin is recommended).
Caution:

To ensure the stability of the cabinet, try to place a heavy and high router below the
cabinet.
Step 2: Use the screw to fix the tray.
Note:

The appearance and installation methods of different cabinets and trays may vary.
This section is just for your reference. The actual situation prevails.
Installing the Floating Nuts to the Cabinet
Before installing the chassis to the cabinet, first install the floating nuts on the upright
square hole bar on the both sides in the front of the cabinet.
Step 1: Align the mounting ears with the floating nuts on the square hole strip of the cabinet