Maipu MP1800X-40, Руководство по установке

Страница: 45 / 65

MP1800X Series Router
Router Maintenance
copyright

2017Maipu, all rights reserved
A-1
6
Router Maintenance
This chapter describes the changing and maintaining of the device module.
6.1
De-dust the Router
This section describes how to de-dust the MP1800X series router.
Warning:

All de-dusting must be operated based on the anti-static requirements. For
example, the staff must wear the anti-static overalls, anti-static wrist, and anti-wrist
gloves if they’ll work on the workbench.

The de-dusting tool and cleaning agent are selected based on a certain standard.
Otherwise, the board of the router will be severely damaged.
6.1.1
De-dust the Board
During the router operation, due to the charged board and cross ventilation in the
router dissipation, the board will inevitably absorb and accumulate the charged particle
or dust in the air. When the air cleanliness is weaker and the relative humidity is lower,
this absorption process is stronger. When the dust accumulates to a certain degree,
the heat dissipation rate and electrical insulation performance will be badly affected,
which further brings potential dangers for the stable running of the router.
Caution:

When using a vacuum cleaner, use a clean and dry anti-static soft brush to gently
remove the dust, and meanwhile, use the suction nozzle of the vacuum cleaner to
aim at the anti-static brush, which achieves the brushing and absorbing the dust at
the same time. De-dusting using a vacuum cleaner is easy to operate and of low
cost conserving. But this method cannot de-dust thoroughly and cannot effectively
remove the noxious gas attached on the surface of the board.