DIAGNOSTIC MANUAL
MAN-00152
EMS
OCT 2011/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
107
STEP 1
Connect the smart tester
Turn the ignition ON
Initialise the diagnostic tool
Record the DTC and clear
Turn ignition OFF
Turn ignition ON
Crank the engine
Verify if P0335 is present?
Is P0335present?
Intermittent problem exists
Refer the intermittent problem
inspection procedure
STEP 2
NO
YES
STEP 3
Ignition OFF
Check and correct if any loose
connections noticed in the
crankshaft speed sensor wiring
harness connector
Check for proper fitment of the
crank shaft speed sensor
mounting bolt
Are the bolts tight?
Fix the bolt properly and tighten
it to the torque specified
Clear the DTC and verify
Go to STEP 4
NO
YES
Is the value =
∞Ω
?
Examine the short circuit of
crankshaft speed sensor signal
wires
Repair/replace the wiring
harness
Clear the DTC and verify
Ignition OFF
Crankshaft speed sensor wiring
harness connector
DISCONNECTED
Check the resistance between
pin 1 and pin 2 of the
crankshaft speed sensor wiring
harness connector
NO
YES