DIAGNOSTIC MANUAL
MAN-00152
EMS
OCT 2011/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
103
STEP 6
Check for any damage on the
trigger wheel teeth
Check for proper mounting of
trigger wheel mounting screw
Is there any
damage/screws
loosened?
If the screws are loosened ,
tighten to torque
If toner wheel damaged, replace
it with a new one
Clear the DTC and verify
STEP 5
Check the crankshaft end play
Is the end paly with
in limits?
Identify the root cause of the
crank shaft end play and rectify
Clear the DTC and verify
STEP 7
Check whether the crankshaft
speed sensor wire routing is
closer to starter motor
Is the wire closer to
starter motor?
Route the wires correctly
(Refer wiring manual for proper
routing)
Clear the DTC and verify
Suspect crankshaft speed
sensor internal failure
Replace crankshaft speed sensor
with a with a new one.
Check and verify for any new
DTC’s
NO
YES
YES
NO
YES
NO
