Maguire Products VBD-1000, Установка, эксплуатация и обслуживание

Страница: 26 / 85

Maguire Products, Inc.
Rev. March 5, 2018 – VBD-1000 Touchscreen
26
VBD

- Vacuum Dryer

Shutdown – Immediate or Planned
End Preheat - (shown only if in a preheat cycle)
Skips the preheat allowing material to immediately pass down
to the Vacuum Chamber (example: material has already been
heated and dryer has been taking offline briefly and powered
back on).
At any point during the preheat cycle or standard operation
(operation after initial preheat cycle), pressing the red
Shutdown button will bring up the Shutdown Options screen
with the following shutdown options:
Shutdown – Shutdown will continue to run the dryer and
process the material in the Vacuum Chamber and the
Retention Hopper until they are empty. Selecting Planned
Shutdown will display the Cooldown option.
Cooldown (ON/OFF) – When enabled Cooldown will
gradually bring down the temperature of the material in the
heating hopper to the specified temperature (Cooldown
Temp) over the specified time period (Cooldown Time).
To adjust the Cooldown Temperature and Cooldown Time
use the arrow buttons
to adjust the setting. Press
ENTER to advance through the digits and to complete the
setting adjustment.
Press the
Shutdown button to shutdown.
Pressing the red power button during a Planned Shutdown
will display the Immediate Shutdown Screen allowing
initiation of an immediate shutdown of the dryer.
Pause – Press the Vacuum Chamber will display the Vacuum
Chamber Setup screen. Pause is the red button at the bottom
of the screen. Pauses the vacuum timer indefinitely. To
restart after a pause, press RESUME.
Auto Shutdown – Initiates a shutdown (see above) at
specified date and time. For further explanation on how to set
the Auto Stop date and time see page 27.
Immediate Shutdown – Fast but controlled shutdown of the
heater, blower, the vacuum system and the purge system.
Cancel - Exits the shutdown prompt screen, doing nothing.