Maguire Products VBD-1000, Установка, эксплуатация и обслуживание

Страница: 73 / 85

Maguire Products, Inc.
Rev. March 5, 2018 – VBD-1000 Touchscreen
73
VBD

- Vacuum Dryer

Updating the VBD Firmware
When the VBD control panel is turned on, the first screen displayed will show the current
firmware version. If necessary the firmware in the VBD can be updated using a firmware
update supplied by Maguire Products. Firmware updates use the USB port located below the
control screen. The following instructions detail how to do a firmware update.
Do not turn off controller or remove the flash drive while firmware
is updating! Doing so may corrupt the controller’s firmware.
Copy the new firmware update into a USB flash drive. (do not put in a directory)
Insert the USB Flash drive into the USB port on the VBD.
Press
Display will prompt for a password. (default: 22222) Then press:
Press
System Configuration Display will show the System Configuration categories.
Press Resets Display will show System reset options.
Press Firmware Update The controller will search the USB drive for a firmware update
file with the XUF extension.
Select the file from the white display area on the left. If more than one firmware version is stored
on the flash drive, multiple version will be displayed in the white display area. If the display
is blank check USB for the file and that the file is location directly on the drive (not in a sub-
folder). Exit out of this screen and enter again to refresh the display window.
Highlight the version in the white panel on the left and press PROGRAM .
Press To proceed with the firmware update or press the
red X to cancel and exit.
The display will show progress in transferring to the internal SD card, then it will show
progress in verifying the update file. Then the controller will prompt: “
Please toggle power. ”
At this time, remove the flash drive, power off the controller then on. When the controller
restarts the display will show progress updating to the new firmware. When complete, the
display will show:
UPDATES COMPLETE Toggle power . At this time turn off power, then
turn back on.
Additional Firmware Update Information
Software updates can be supplied electronically, via email or by download. Software updates are named according to their date of release. For instance
VTQ0620A.XUF can be interpreted as VT=Vacuum Touchscreen, Q=2017 (Q=2017), 06=June, 20=June 20th, A=the first revision for that day. During the
update process detailed above, new software found on the USB flash drive is first copied to an internally mounted SD card. From the SD card, the software is
then loaded into the VBD. If there is ever a problem with the VBD and the USB port cannot be used or the VBD software is corrupted and cannot load new
software through the menu, new software can be acquired from Maguire and renamed UPDATE.XUF . This renamed software can be copied onto the Flash
Drive and inserted into the USB port of the VBD. When the VBD is turned on, this UPDATE.XUF file will be automatically loaded into the VBD, restoring the
software.