Maguire Products VBD-1000, Установка, эксплуатация и обслуживание

Страница: 24 / 85

Maguire Products, Inc.
Rev. March 5, 2018 – VBD-1000 Touchscreen
24
VBD

- Vacuum Dryer

4. On the Home Screen:
T1 Inlet Temp Setpoint – This is heat hopper inlet
temperature. By the end of the preheat cycle time, all
material in the Heating Hopper will be heated to this
temperature. By default, the Setpoint temperature is
set to 150°F. Contact the material manufacturer for
temperature recommendations.
Preheat Time – This is the duration of heating from a
cold start.
Vacuum Time – This is the minimum duration of a
vacuum cycle. Actual vacuum cycle times will vary
according to the throughput. The default vacuum
time is 20 minutes. In the vast majority of drying
operations, this time is adequate and does not need
to be adjusted. Special circumstances may require
different vacuum times. Please consult a Maguire
Dryer Technical for additional information.
Press the setpoint field to adjust the setting. Use the
on-sceen keypad to enter the setpoint and press the
green check to complete the setting adjustment.
5.
Press the START button to start the dryer.
6.
The display will show that the dryer is running in
PREHEAT
mode and display the following:
T1 Actual -
Actual Heating Hopper inlet air
temperature
T1 Setpoint -
Heating Hopper inlet air temperature
Setpoint.
T2 Temp –
Actual Heating Hopper temperature
Vacuum Time –
Vacuum Time Actual and Vacuum
Time Setpoint.
Vacuum Chamber Weight -
Vacuum Chamber
Actual/Maximum Weight.
7.