Magni Gyro M16C, Руководство по обычному обслуживанию

Страница: 19 / 122

M16 (C) TANDEM TRAINER
MAINTENANCE MANUAL
.
ISSUE PAGE
A_November 2012
19
1.7.3 GENERAL SPECIFICATIONS FOR TORSIONAL TIGHTENING
1. If there is no other specific indication, use the following strengths for all threaded fastening elements:
•
M4: 4 ‐ 4,2 Nm
•
M5: 5,5 ‐ 6 Nm
•
M6: 9,5 ‐ 10 Nm
•
M8: 23 ‐ 26 Nm
•
M10: 34 ‐ 36,5 Nm
•
AN4: 10 ‐ 11 Nm
•
AN5: 18 ‐ 20 Nm
•
AN8: 50 ‐ 70 Nm
2. Never use strong tightening strength on surfaces of fibreglass reinforced plastic.
1.7.4 LUBRICATION AND ANTI ‐ CORROSIVE PRODUCTS SPECIFICATIONS
Rotor head control axis screws ‐ Amber ‐ coloured grease SHELL DARINA R2 or equivalent;
Flap bearings ‐ Amber ‐ coloured grease SHELL DARINA R2 or equivalent;
Rotor head notched gear ‐ Water ‐ repellent grease CASTROL GRAPHITE GREASE or equivalent;
Pre ‐ rotation Bendix gear ‐ Lithium graphite grease CASTROL MOLY GREASE or equivalent;
Pre ‐ rotation flexible shaft ‐ Lithium graphite grease CASTROL MOLY GREASE or equivalent;
Rudder pedals bolts bushes ‐ Amber ‐ coloured grease SHELL DARINA R2 or equivalent;
Outer surfaces of bearings ‐ Water ‐ repellent grease CASTROL GRAPHITE GREASE or equivalent;
Rear wheels pivot stem ‐ Water ‐ repellent grease CASTROL GRAPHITE GREASE or equivalent;
Inside of control cables sheaths ‐ Spray grease CASTROL CHAIN LUBE RACING or equivalent;
Floating bush of rotor hub ‐ bar ‐ Spray grease CASTROL CHAIN LUBE RACING or equivalent;
Rudder upper bush ‐ Lithium graphite grease CASTROL MOLY GREASE or equivalent;
Engine inner lubrication ‐ In accordance with the latest issue of engine maintenance manual.
1.7.5 CARE AND CLEANING PRODUCTS SPECIFICATIONS
Surfaces of fibreglass reinforced plastic
Rotor and propeller blades ‐ Avioclean P47 Special Propeller Cleaner
Transparent surfaces ‐ Avioclean S23 Canopy Scratch Remover
‐ Avioclean C32 Aircraft Canopy Cleaner
Inner surfaces and padding ‐ Silicon ‐ free instrument panel spray polisher
Instrument panel ‐ Silicon ‐ free instrument panel spray polisher
Engine outer surfaces ‐ Anticorrosive ACF 50
Non ‐ anodized aluminium surfaces ‐ Anticorrosive ACF 50
Control rod ends ‐ Anticorrosive ACF 50
WARNING:
To make all the maintenance operations easier, facsimiles of inspection sheets are enclosed with the
present manual. They indicate the sequences of procedures to carry out, as well as their periodicity
(hours, years).