Magni Gyro M16C, Руководство по обычному обслуживанию

Страница: 109 / 122

M16 (C) TANDEM TRAINER
MAINTENANCE MANUAL
.
ISSUE PAGE
A_November 2012
109
6.4 PRESERVATION OF ROTOR BLADES
The rotor blades supplied by Magni Gyro must be handled with care and attention during all the following
operations: rigging and de ‐ rigging, garaging of the gyroplane and possible transportation.
WARNING DANGER:
Whenever the operator intends to execute one of the operations described above and due to the
importance of the rotor, he should keep in mind the following instructions given by Magni Gyro:
1. Be sure that you have a stable surface or stable platforms to use as a base during assembly or
disassembly of the blades;
2. Be particularly careful when installing the rotor on the gyroplane head not to touch any obstacle with the
blades (e.g. walls, doors, gates, etc.), especially along the very fragile trailing edge;
3. Be sure there are enough operators helping you (at least three) or use a hoist (see fig. 3.5/1) to lift the
rotor to assemble it on the gyroplane rotor head;
4. When moving the gyroplane to the hangar, move it carefully and pay attention not to damage the blades
as said in point 3;
NOTE:
When garaging the gyroplane, the rotor brake must always be ON so as to avoid rotor movements
independent from the fuselage of the gyroplane.
5. Never tie the blades when moving the gyroplane to the hangar or keeping it there, either to keep them in
horizontal position or to avoid rotation. This could deform the blades in the long term;
6. In case you wish to protect the blades while they are assembled on the gyroplane, use only some kind of
material that lets the air pass through freely (no plastic, nor pluriball (plastic material with bubbles), etc.);