Mace HydroMace XCi, Руководство по эксплуатации продукта, Страница: 183 / 270

"Flowrate (using velocity)"- channel type
This channel type is used to calculate a flow rate based upon the results obtained from configured velocity
and depth channels.
Add a "Flowrate (using velocity)"- channel type
1. After selecting the "" Flowrate (using velocity)
" channel type and naming the new channel, the
"
Select velocity channel
" dialogue box will appear prompting you to use the drop down list to
highlight the "
Velocity channel
" from which the new "
Flowrate (using velocity) channel
" will
receive its value.
2. Click “ Continue
” and the “
Flowrate measurement type
" dialogue box will appear.
3. Select either “ Full circular pipe ” or “ Circular pipe using depth ” depending upon your application.
4. If you select “ Full circular pipe
”, click “
Continue
” to complete the new channel. If you select
“
Circular pipe using depth
”, click “
Continue
” and the “
Select depth channel
” dialogue box will
appear. In the “
Select depth channel
” dialogue box use the drop down list to highlight the "
Depth
"
channel from which the "
Flowrate (using velocity)
" channel named will receive its value. Click
“
Continue
” to complete the new channel.
NOTE: If “ Other conduit type ” was selected when adding a " Velocity "
channel, then the “ Flowrate measurement type ” dialogue box will not appear
and will automatically prompt for selection of both " Velocity " and
" Depth " channels.
MACE XCi User Manual - 183 -