Mace HydroMace XCi, Руководство по эксплуатации продукта, Страница: 127 / 270

Status message Description
Device reset #2* May occur between "Low battery" and "Flat battery" under certain
conditions.
TOD clock error* Error reading time-of-day clock
Pulse event A pulse from a pulse event channel has occurred
Status change The value on a status event channel has changed
Upload "HTTP OK" A successful HTTP upload was made to the MACE data server
Upload "FTP OK" A successful FTP upload was made to an FTP data server
Upload timeout An unsuccessful upload attempt was made
Upload bearer error The WebComm card was unable to establish a bearer connection
and an unsuccessful upload attempt was made
Terminated by operator The download was aborted by the user
Incompatible session/s skipped The download includes only data since the last channel re-structure
NOTE: * - These messages are NOT symptomatic of a unit failure. Rather, they are a
sign that the XCi has dealt with a potential problem internally.
NOTE: For further " WebComm " related status messages, see Error messages table:
Time stamped data
At each time stamp the date, time and recorded channel values are shown. The date and time are followed
by the recorded values for each of the configured channels. In the popup above, the configured channel is
" Velocity " and it's time-stamped values include:
2011/08/24 16:32:00, 3.31
2011/08/24 16:32:30, 3.34
2011/08/24 16:33:00, 3.3
2011/08/24 16:33:30, 3.3
End of file
The end of the data file is always delineated by a " Download End " followed by the date and time.
MACE XCi User Manual - 127 -