Mace HydroMace XCi, Руководство по эксплуатации продукта, Страница: 105 / 270

NOTE: If a WebComm card is installed and an
upload session is active, you will NOT be able to " Connect " to the XCi device. In this
case an error will occur until the WebComm session is inactive.
NOTE: The device must be configured and started before the instrument will
measure and record data
NOTE: Once finished, remove the MACE comms cable and screw the comms port
cover back in place to maintain enviromental protection
Remote communications with an XCi device
When a MACE WebComm card is installed and configured in the HydroMACE XCi device a remote
communications session may be initiated.
1. With FloCom
+
running, click " Connect>to remote site " and the " MACE Remote Access
application " will open.
2. For further details see Remote communications with an XCi device
NOTE: The XCi device MUST be configured and started via the local
communications port BEFORE a remote comms session can be initiated.
What to do if the password is lost/forgotten
In the event that you have forgotten or lost your password, the following steps should be taken:
1. From the “ MACE FloCom Plus ” main screen, click “Help>Show device authorisation code ”.
2. Click “ Connect
” and the “
Connect to device
” dialogue box will appear.
MACE XCi User Manual - 105 -