MA lighting Network Switch, Руководство пользователя

Страница: 34 / 73

© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
6. Presets / Filters
This chapter provides information about the preset and filter options provided trough the web interface.
What are presets?
It is useful to apply presets or filters to ports for a higher network performance or for safety reasons, e.g. to block
Telnet.
A preset contains collection of filters.
Presets are used to allow or to block the protocol you have selected.
If a preset is set to allow (= green), the network packets matching the filters in the preset are allowed. All other
network packets not matching the filters of this preset, will be blocked.
If a preset is set to block (= red), the network packets matching the filters in the presets are blocked. All other
network packets not matching the filters of this preset, will be allowed.
Important:
Filters are applied in the outbound and the inbound network traffic of the specific physical connector.
There are seven predefined presets available:
MA-Net2
dot2-Net
Art-Net
MA-Remote
MA-Net1
grandMA2
sACN
Important:
Use presets only if a filter function is required. If you use the MA Network Switch in a MA System it is not
mandatory to use the grandMA2 preset.
For more information, see apply presets .
For more information about the predefined presets, see factory defaults .
What are filters?
Instead of using presets, you can use filters. For more information, see apply filters .
Filters are objects consisting of:
data type
addressing
further parameters depending on the data type
34