MA lighting Network Switch, Руководство пользователя

Страница: 26 / 73

© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
5.2. Assign Groups to Ports
You can assign one group for each port. Two devices must be part of the same group to communicate.
Groups are a logical segment of network users (= VLAN). With groups it is possible to send different signals in
different groups via the same network cable without affect the other signal. For example sound and light signals.
The groups for port 1 through 13 can be manually configured at the Edit Ports / Groups Window.
By default, all groups are managed groups.
The assigned group has a green dot.
The switch has eight different groups.
1. Group01 (Red)
2. Group02 (Yellow)
3. Group03 (Green)
4. Group04 (Cyan)
5. Group05 (Blue)
6. Group06 (Magenta)
7. Trunk (White)
8. Manage (Gray)
If more than one switch is in a network and more than one group is in use, the Trunk is needed to forward all group
packets to the other switches. The Trunk bundles all other groups.
Important:
You need at least one manage group in the network.
If no manage port is in the network, you can not configure the switch anymore. A
factory reset is
necessary.
Hint:
Use port 13 on the front panel as management port to connect the PC for switch configuration via the
web interface.
Assign Groups
26