MA lighting Network Switch, Руководство пользователя

Страница: 43 / 73

© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
8. Enter the
IPv4 mask
.
9. Click
Create filter
.
The IPv4 UDP or TCP filter is created and visible the end of the filter tables. The filter is saved in the startup
configuration.
Create IPv6 UDP Filter or IPv6 TCP Filter
To create an IPv6 UDP filter or IPv6 TCP filter:
1. Open the Edit Filters pop-up.
2. Enter the
Filter name
.
Each filter name must be unique. The filter name contain letters, numbers, and hyphens (-).
3. Select the
Data type
. IPv6 UDP or IPv6 TCP.
4. Select in the drop down if the
Addressing
is
- Any
- Unicast
- Multicast
- Broadcast
5. Select the
DPort type
(= destination port type). Choose between
Single Port
or
Port Range
.
6. Enter the DPort (= destination port number). Valid port numbers are between 0 - 65535.
7. Click
Create filter
.
The IPv6 UDP or TCP filter is created and visible the end of the filter tables. The filter is saved in the startup
configuration.
Create ARP Filter
To create an ARP filter:
1. Open the Edit Filters pop-up.
2. Enter the
Filter name .
Each filter name must be unique. The filter name contain letters, numbers, and hyphens (-).
3. Select the
Data type ARP
.
4. Select in the drop down if the Addressing is
- Any
- Unicast
- Multicast
- Broadcast
5. Click
Create filter
.
The ARP filter is created and visible the end of the filter tables. The filter is saved in the startup configuration.
Paste Filter Configuration
If you already have a filter configuration for a new filter, you can paste the configuration data into the field.
43