manualshive.com logo in svg

M Squared SolsTiS, Руководство пользователя, Страница: 9 / 65

Поделиться
Скачать
M Squared SolsTiS Скачать руководство пользователя страница 9

 

ix

 

SolsTiS User Manual v10.0

 

D.3

 

System Safety Features 

 

Warning!

 The SolsTiS laser system meets regulatory 

design & safety standards declared within this manual 
only when used with a compatible, IEC/CE/CDRH-
certified pump laser configured for SolsTiS per 
instructions in this manual. 

 

Caution!

 To ensure a full understanding of the safety 

features, labeling and operation of your S pump 
laser system, please refer to all manuals associated 
with the system. If, after consulting your manual(s), 
anything remains unclear, please consult M Squared 
Lasers or an authorized representative before 
attempting to operate your system. 

 

Applicable standards 

The SolsTiS is designed to and complies with: 

 

IEC60825-1, 2007-03; Safety of laser products 

– Part 1: 

Equipment classifications and requirements 

 

IEC61010-1, 2001-02; Safety requirements for electrical 
equipment for measurement, control and laboratory use 

– Part 

1: General requirements 

 
When configured with an IEC/CE/CDRH-certified, compatible pump 
laser per the instructions in this manual, the SolsTiS and its pump laser 
collectively provide the following safety features: 
 
 
 
 
 
 
 

Protective Housing

 

 

 

 

Danger!

 There are no user-serviceable parts inside the 

SolsTiS and pump laser head, control units, or 
interconnecting Pump Integration Kit (PIK) and 
associated Pump Optics Module (POM). Operating with 
any cover removed

—including the covered beam path 

between your pump laser and POM, and between POM 
and SolsTiS

—is prohibited, voids your warranty, risks 

contamination of optical surfaces, and may expose 
people to high voltages and/or laser radiation hazards. 

 
Neither the SolsTiS and pump laser head, nor their controllers, nor 
interconnecting Pump Integration Kit with associated Pump Optics 
Module (POM), contain user-serviceable parts and must never be 
opened by the user. (All SolsTiS system components have covers that 
are secured using tamper-proof screws and sealed with 

Warranty Void

 

stickers.) Cover safety interlocks are therefore neither required nor 
provided for SolsTiS when used with a sealed, compatible, 
IEC/CE/CDRH certified pump laser. SolsTiS is also supplied with 
protective opaque covers to provide a light tight covered and sealed 
beam path between your pump laser and the POM, and between the 
POM and your SolsTiS. These beam covers should never be removed 
while the pump laser is operating, as this will expose the user to a Class 
IV laser safety hazard. Warning labels indicating non-interlocked 
protective housings are affixed to SolsTiS system components as shown 
in Figure 4 and Figure 5. For the location of pump laser safety warning 
labels, please refer to the manual that accompanied your pump laser. 

 

Содержание SolsTiS


































































Отзывы:

Нет отзывов