manualshive.com logo in svg

M Squared SolsTiS, Руководство пользователя, Страница: 62 / 65

Поделиться
Скачать
M Squared SolsTiS Скачать руководство пользователя страница 62

 

42

 

SolsTiS User Manual v10.0

 

Appendix B: Pump Lasers Assessed for Use with 
SolsTiS 

 

Warning! 

Do not change the pump laser that was 

designated in your SolsTiS laser purchase to any other 
pump laser without prior written approval from 
M Squared Lasers and, if approved, without written 
instructions. To do so could cause a safety hazard, 
damage to your system, and may invalidate your 
warranty. 

 

Note!

 We endeavour to keep the list of SolsTiS-

compatible pump lasers up to date at all times, but due 
to constantly evolving product lines from both pump 
laser manufacturers and M Squared Lasers, this list 
may contain inaccuracies or obsolete products. If, after 
reading this list, you are unsure or have any doubts 
about the use of your pump laser with SolsTiS, please 
contact M Squared Lasers or an authorized 
representative for more information. 

 
The list below includes third-party IEC/CE/CDRH certified pump laser systems 
that have been assessed by M Squared Lasers as compatible with SolsTiS 
when used correctly with SolsTiS (per instructions in this and other manuals 
included with your SolsTiS system). This list neither constitutes a 
recommendation of or preference for any of the pump lasers listed, nor a 
guarantee of satisfactory use, safe use, or any particular specified 
performance when used with SolsTiS. Similarly, if a pump laser is not 
currently included in this list, it does not necessarily mean that the pump laser 
is not compatible with SolsTiS. If a pump laser is not listed, however, it should 
under 

no circumstances

 be used with SolsTiS before contacting M Squared 

Lasers to confirm its compatibility (see Chapter 7 

– Customer Service). The 

inclusion of a pump laser in this list also does not absolve any user of a 
S pump laser system of the need to ensure safe use of the system, 

per instructions contained within this and other manuals included 
with your system. 
 

Coherent, Inc 

Verdi 

– 2, 5, 6, 7, 8, 10, 12, 15, 18W 

 

Laser Quantum Ltd 

Finesse 

– 4, 5, 6, 7, 8, 10, 12, 14, 16W 

Opus 

– 2, 3, 4, 5, 6W  

 

Newport-Spectra Physics Corp 

Millenia 

– 5, 6, 10, 15W 

 

Lighthouse Photonics 

Sprout 

– 5, 6, 8, 10, 12, 15W 

 
 
 

Содержание SolsTiS


































































Отзывы:

Нет отзывов