M/A-Com Orion Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 80

background image

TRUNKED OR CONVENTIONAL MODE

OPERATION

SIREN/LIGHT OPERATION

Each siren/light key is designed to control an optional siren/light package.
Pressing a siren/light key will light the key indicator. Each siren/light key
(except RESET) can be programmed for either CANCEL or ADDITIVE
operation. If programmed for CANCEL, then all other siren/light activity is
cancelled except for the activity associated with this key. If programmed for
ADDITIVE, then a key press will add its respective siren/light activity to the
current siren/light activity. It is important to note that while the lights are
additive, only a single siren can be active at a time. The current siren will be
determined from the recently pressed key that contains a siren assignment.

Each siren/light key (except RESET) can be programmed for Toggle,
Momentary or Timed. In

Toggle

, each key press will toggle the state of the

key between ON and OFF. In

Momentary

, a key's respective feature will only

be active while the key is pressed and held. When programmed for

Timed

, the

siren/light key activity will only be active during the programmable time-out
window. The duration of the time-out window is programmable between from
.5-127.5 seconds. During the time-out window the respective key indicator
will be ON. When the timer expires, the activity will be terminated and the
indicator will turn OFF. If an additional time-out key (programmed for
ADDITIVE) is pressed during the time-out window, then the time-out window
is reset and both activities will terminate at the same time.

Digital Voice (ProVoice / Aegis / Voice Guard

®

Operation)

Voice Modes

Each system (trunked or conventional) in the radio is programmed for no
digital voice operation or one of the three-supported Digital Voice formats
(ProVoice/Aegis, or Voice Guard). Aegis or ProVoice programmed systems
have three (3) different voice modes: clear (analog), digital and private. Voice
Guard systems have two (2) voice modes: clear (analog) and private. The
voice modes are programmed on a per-group basis within each trunked system
and on a per-channel basis within each conventional system. A radio must be
equipped with the encrypt/decrypt option before it will operate in private
mode.

NOTE

Current ProVoice Conventional operation is for talk-
around mode only.

61

«
...
59
60
61
62
63
...
»

Содержание Orion

















































































Отзывы:

Нет отзывов

Похожие инструкции для Orion

Бренд: IDT Страницы: 13

Бренд: Stager Страницы: 30

Бренд: Denver Страницы: 20

Бренд: MAKINEX Страницы: 23

Бренд: Denver Страницы: 29

Бренд: BRUEL & KJAER Страницы: 24

Бренд: Covidien Страницы: 112

Бренд: Clever Страницы: 26

Бренд: La Crosse Technology Страницы: 22

Бренд: XM Satellite Radio Страницы: 58

Бренд: Radio Shack Страницы: 16

Бренд: Dared Страницы: 6

Бренд: A-iPower Страницы: 112

Бренд: morse Страницы: 34

Бренд: Craftsman Страницы: 10

Бренд: Craftsman Страницы: 14

Бренд: Sony Страницы: 44

Бренд: Sony Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды