M/A-Com Orion, Руководство оператора

Страница: 23 / 80

23
The following example systems list is used to explain the process:
SYSTEM
1 NORTH
2 SOUTH
3 EAST
4 WEST
After entering a selection mode, the following generic display format will
appear.
X X X X X X X X
Y Y Y = Z Z Z
Line one shows the currently selected item’s name (XXXXXXXX) from the
list. Line two indicates the list (YYY) that the selection is to be made from
and the number of the selected item (ZZZ) within the list. (In some cases the
information on lines 1 and 2 will be exchanged. Enter the system selection
mode by pressing the
S
key. If SYSTEM 2 is the current selection, the
display appears as follows:
S O U T H
S Y S = 2
Line one contains the current system name, SOUTH, and line two, SYS = 2,
indicates that selection is from the system list and it is the second system
within the list.
A new system from the list is selected by using the RAMP control
,
or
.
or by directly entering the system number with the numeric keys. The
RAMP control
,
or
.
scrolls through the list in increasing and
decreasing order. In the previous example, pressing the RAMP control
,
selects the EAST system as shown in the next display.
E A S T
S Y S = 3
The radio may be programmed to wrap around from one end of a list to the
other end or to stop at the ends.