45
2. Overdial numbers are transmitted using either method as follows:
METHOD 1:
Press and hold PTT while entering the overdial number
sequence from the keypad. This method sends DTMF tones
during individual, telephone interconnect, trunked group or
conventional channel calls. Anytime the PTT button is
pressed and held, the keypad is enabled for DTMF entry.
METHOD 2:
Press
p
to enter the overdial select/entry mode and follow
the selection mode rules to call up a stored number from the
phone list or to directly enter the overdial digits. Press PTT to
send the overdial sequence once. If the number needs to be
transmitted again it must be selected or entered again (this
prevents unwanted numbers from being sent the next time the
PTT button is pressed during the call).
This overdial select/entry mode remains active until the call is
dropped, cleared, or
m
is pressed. The overdial select/entry
mode can be re-entered if the call is still active by pressing
p
.
Programmable Entries
Individual call ID numbers, telephone numbers and other number sequences
for overdialing are stored in the special call lists when programming the radio.
The radio operator can change the first ten entry locations of these lists. The
keypad is used when adding, changing and storing numbers in these entry
locations.
Use the following procedure to store a number in one of the first ten entries of
a special call list:
1. Press
i
or
p
to enter the individual call list or the phone call list. The
selection mode rules apply.
2. Scroll through the list using the
RAMP
control
,
or
.
until one of
the first ten entries is reached.
NO ENTRY
is displayed if the location is
empty.
3. Enter the desired number. If necessary, a pause can be entered by pressing
and holding
0-9
, (
*
), or (
#
) until an underscore appears in the display. The
individual call list entries will accept up to 5 digits. The phone call list
entries accept a combination of up to 31 digits and pauses.
4. Press and hold
m
until the display changes indicating that the number
has been stored.
5. Repeat the steps above if the number stored in an entry location needs to
be changed.
Содержание Orion
Страница 1: ...Operator s Manual LBI 38888 Rev N Mar 05 Orion Mobile Radio ...
Страница 79: ...NOTES 79 ...
