M/A-Com Orion, Руководство оператора

Страница: 41 / 80

INDIVIDUAL CALLS
Receiving and Responding To An Individual Call
When the radio receives an individual call (a call directed only to the user's
radio), it un-mutes on the assigned working channel and turns on the
BSY
indicator. Line one shows ID followed by the logical ID number of the unit
sending the message, or the associated name if the ID number is found in the
individual call list. The individual call indicator display
*
INDV
* is displayed
on line two. The radio can be programmed to ring when an individual call is
received. If enabled, the ring begins five seconds after the caller un-keys and
will continue until the PTT button, the
c
button, or
i
is pressed.
NOTE
Hook switch functions the same as
c
key in I-
CALL, phone call, and menu modes.
If a response is made to the call prior to the programmed call-back time-out,
the call will automatically be directed to the originating unit. If a response is
not made before the call-back time-out, the radio will return to normal receive
mode, but
*
WHC
* will be displayed. If the caller's ID is not received,
UNKNOWN will display for the duration of the call and there will be no
callback hang-time.
To respond after the callback time-out, press the
i
key. The radio's
display will show the callers ID on the first line and
WHCI=1
on the second
line. Pressing the PTT button at this point will initiate an individual call back
to the original caller. (If the last call was a group call, the display will show
WHCG=1 . Pressing the PTT button will place the call as an individual call.)
The radio stores the ID's of the last 10 callers in the Calls Received List as
shown. Individual calls are stored in the top half of the list (1-10) and group
calls are stored in the bottom half of the list (1-10). The most recent call is
stored in position 1, the second most recent call is stored in position 2, etc.
41