12
SELECT
Secondary function - activates a selected item within a list.
After the menus list is accessed, select a menu item from the
list via RAMP control , or . and activate it with this key.
Once activated, MENU continues its secondary function for
activating a selected parameter setting until the radio returns
to its normal receive state. This is similar to an enter key.
s
The Status key permits the transmission of a pre-programmed
status message to an EDACS site.
n
The Message key permits the transmission of a pre-
programmed message to an EDACS site.
c
C
Serves several purposes depending on the operating mode. In
trunked mode, the CLR button exits the current operation and
removes all displays associated with it. The radio and display
then return to the group receive state. In Conventional mode,
pressing this button un-mutes the receiver so activity on the
selected channel can be monitored. When pressed and held
for approximately 3 seconds, this button toggles conventional
channel decoding (Channel Guard, Digital Channel Guard,
T99) on and OFF if programmed for the selected channel.
p
Used to place telephone calls through the radio by selecting
the interconnect special call function. See Telephone
Interconnect Calls for details.
d
Used to adjust the current display intensity and the keypad
backlight level.
i
Used to call individual or make an all-call by selecting the
individual call function. See Individual Calls for details.
E
This key function is used to declare emergencies.
ALM
Toggles the external alarm ON/OFF. The external alarm is
used to indicate the radio is receiving an Individual Call.
Press the key once to enable external alarm and press again to
disable external alarm.
SG1-SG5
Corresponds to five (5) pre-programmed System/Groups.
Pressing a key programmed for SG1 would switch the radio to
the pre-programmed System/Group 1. Pressing a key
programmed for SG2 would switch the radio to the pre-
programmed System/Group 2, etc.
WAIL, YLP,
RST, SL1-
SL8
The
WAIL
and
YLP
(Yelp) keys are designed to control an
optional Siren package. The
SL1-SL8
(Siren/Light) keys are
designed to control an optional Siren/Light package. The
RST
(Reset) key is used to turn all sirens and lights OFF.
SPK
This key function is used to toggle the external speaker
ON/OFF.
Содержание Orion
Страница 1: ...Operator s Manual LBI 38888 Rev N Mar 05 Orion Mobile Radio ...
Страница 79: ...NOTES 79 ...