M/A-Com Orion Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 80

background image

50

Message Operation

Message operation permits the transmission of a pre-programmed message
text to an EDACS site.

To send a message, press the

n

button (key light comes on) then press one

of the number buttons (0-9) to select the pre-programmed message text. If no
message text has been programmed for the selected number button, the radio
will display

NO ENTRY

and a low-pitched tone sounds. A valid selection

will permit the message text to appear in the display for a pre-programmed

time. After the time-out expires or the

m

button has been pressed (the

m

button will override the time-out period), the message text is selected and will
be transmitted to the site. If the site receives the message properly when

transmitted, a high-pitched tone sounds and the

n

key light remains lit. If

the site does not receive the message properly, a low-pitched tone sounds and

the

n

key light will blink.

If an incorrect message text was selected or the incorrect number button was
pressed, the message text can be changed during the pre-programmed time-out
period by pressing another number button. The message text selection can also

be cancelled by pressing the

c

button prior to the time-out period.

To view the currently selected message text after it has been transmitted, press

the

n

button and then the

c

button prior to the time-out period. If the

message text was not sent successfully to the site, the text associated with the
message will flash in the display.

EDACS CONVENTIONAL P1 SCAN

This feature permits the radio user to scan a pre-programmed conventional
system and channel as a Priority 1 (P1) channel while the radio is selected for
EDACS trunked system. If activity is detected on the conventional P1
channel, the radio will un-mute and remain on this conventional channel for
the programmable hang time.

The radio must be pre-programmed to designate a button for scan ON/OFF
operation.

DYNAMIC REGROUP OPERATION

Dynamic regroup operation permits multiple talk groups (up to eight) to be
added to a radio via the system manager. The radio must be pre-programmed
to respond to regrouping. Dynamic regrouping will not be activated in a radio
until an activation message is sent by the system manager. Each radio that
receives and acknowledges regrouping instructions is successfully regrouped.

«
...
48
49
50
51
52
...
»

Содержание Orion

















































































Отзывы:

Нет отзывов

Похожие инструкции для Orion

Бренд: JBL Страницы: 11

UTG1000X Series

Бренд: UNI-T Страницы: 74

Бренд: JBL Страницы: 25

Бренд: Garland Страницы: 120

IC-F9511 P25/HT

Бренд: Icom Страницы: 87

Бренд: Sungale Страницы: 24

Бренд: Porter-Cable Страницы: 24

Бренд: ION Страницы: 56

Бренд: Denver Страницы: 80

Бренд: MAJORITY Страницы: 24

Бренд: Sangean Страницы: 32

Бренд: Nanni Страницы: 26

Бренд: MULTIQUIP Страницы: 72

Бренд: Power Tech Generators Страницы: 24

Бренд: Fermont Страницы: 33

Бренд: Salora Страницы: 37

Бренд: Audizio Страницы: 36

Бренд: Zodiac Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды