M/A-Com Orion, Руководство оператора

Страница: 22 / 80

OPERATION
The Orion mobile radio unit can be programmed to operate in either a trunked
system or a conventional system or both. Operating features and functions
have been grouped according to the type of system the radio is operational.
This first section contains general operating procedures (e.g., Turning On The
Radio). The second section,
TRUNKED MODE OPERATION , covers those
operating procedures that are only used in a trunked system (e.g., Group
Scan). The third section,
CONVENTIONAL MODE OPERATION , covers
those operating procedures that are only used in a conventional system (e.g.,
Squelch Adjust). The fourth section,
TRUNKED OR CONVENTIONAL
MODE OPERATION , covers those operating procedures that may be used
in either a trunked or conventional system (e.g., Multiple Radio Operation).
TURNING ON THE RADIO
Rotate the POWER ON-OFF/VOLUME knob clockwise, out of detente to
turn the radio on. A short beep (if enabled through programming) indicates the
radio is ready for operation. The display indicates, if programmed, the last
selected system name on line one and the last selected group or channel name
on line two.
In the EDACS trunked environment, if communication with the system's
control channel cannot be established, the
CC SCAN message will be
displayed. This may occur if, for example, the radio is out of range of the
trunking site. It may be necessary to move to another location or select
another trunking system to re-establish the control channel link for trunked
mode operations.
SELECTION MODE RULES
Many operations require selection from a list such as system, group or phone
number. This selection process is handled in the same manner for all lists. The
RAMP control
,
and
.
, SEL , 0-9 , * , # , the DEL button and the
c
button are used during the selection process. The following example systems
list is used to explain the process:
NOTE
The hook switch functions the same as the
c
key in
I-Call, phone call, and menu modes.
22