18
2.2.2.1
Setup the Analog PTZ Camera
1. Select the channel of analog PTZ camera on Preview UI.
2. Click
PTZ
button from preview UI. And then, the PTZ control panel will show up on screen.
3. In the PTZ control panel, click
Setup
(see also
Chapter 2.2.2
).
4. When the PTZ Setup dialog box appears, select the camera number and mark the
Use PTZ
check box to
enable PTZ setting.
5. In the Connection Settings section, fill in the following selections. Then, click
Save
to keep the settings.
-
COMPort:
The connecting port is fixed and can
’t be changed. The default is RS485 port.
-
ID:
Assign an ID number for the PTZ camera.
-
Baud Rate:
Please refer to the user
’s manual of the PTZ camera to make sure the baud rate.
-
Protocol:
Please refer to the user
’s manual of the PTZ camera to make sure what protocol is using.
6. In the
Preset Setting
section, use the control panel to adjust the position of the PTZ camera and select the
preset number to assign a number for the PTZ camera current position. Set the
DwellTime
(1-60 sec) for
how long the PTZ camera stays in that position before it moves to the next one. Click
Save
to keep the
Preset Setting
settings.
i
The gray out functions mean DVR doesn
’t support.
7. Repeat step 4 and 5, if you want to save another PTZ camera position.
8.
Restore AutoPan Time:
set a time period for restoring auto path function after the PTZ camera has been
moved manually. Mark the check box and set the time period in second.
9. After finished all configurations, click
OK
to exit. Click
Cancel
will exit and without saving the settings.
Use to adjust
the lens of PTZ
camera for
preset position
setting.
