LumiraDx SARS-CoV-2, Руководство пользователя

Страница: 7 / 118

7 of 21
Document Name: SARS-CoV-2 Ag Test Strip Product Insert
Document Number: S-COM-DOUT-00112 Revision: 2
This document is controlled and released electronically in Grand Avenue. Hard copies are uncontrolled and should not be relied upon for
the most recent version unless formally issued and stamped by QA. Created with S-QMS-TEM-00001
Instructions for sample extraction:
1)
2)
3)
4)
Remove the seal from the top of the Extraction Vial containing the
Extraction Buffer.
Place and soak the Patient Swab in the Extraction Buffer for 10
seconds and then stir well by rotating the swab against the side of
the vial 5 times.
Firmly attach Dropper Lid to the top of the Extraction Vial. The
extracted sample must be used within 5 hours of preparation when
stored at room temperature. Extracted nasal specimens may be
frozen at -80°C and used up to 5 days after freezing.
Squeeze Swab Remove the Patient Swab while squeezing the
middle of the Extraction Vial to remove the liquid from the swab.
Discard the swab in biohazard waste.