LumiraDx SARS-CoV-2 Скачать руководство пользователя страница 50

Страница: 50 / 118

Safe disposal

•

Follow proper infection control guidelines for handling all specimens and

related items. Properly dispose of all contaminated waste according to

local regulations.

•

The LumiraDx Instrument and its components must be treated as

potentially biohazardous waste. Decontamination (i.e. a combination of

processes including cleaning, disinfection and/or sterilization) is required

before reuse, recycling, or disposal.

•

Dispose of the system or its components according to the appropriate

local regulations.

Introduction - 17

1.7 Precautions

Only operate the LumiraDx Instrument for its intended purpose and in

accordance with this Platform User Manual and warnings. If the Instrument is

used in a manner not specified in the Platform User Manual, protection provided

by the equipment will be impaired. The LumiraDx Instrument (including power

supply unit) is designed to operate within the manufacturer specifications. Do

not exceed the manufacturer specifications when in use.

Avoidance of electrical shock, fire and explosions

•

Use only the power supply unit that is provided with the Instrument. Use

the appropriate power blade for the region. The correct power supply

unit and adapter is required to maintain the safety and electromagnetic

compatibility of the system.

•

Always operate this Instrument on a clean, level and stable surface. Do

not drop the Instrument. Ensure that air flow to the ventilation openings

located on the back of the Instrument are not restricted.

•

Risk of electrical shock. Do not operate the Instrument or the power

supply unit if it has been opened, damaged or exposed to moisture,

condensation or rain.

•

Overheating can cause the battery pack to catch fire or explode.

Содержание SARS-CoV-2























































































































Результаты поиска

Содержание SARS-CoV-2

Отзывы:

Похожие инструкции для SARS-CoV-2

Бренды по названию

Популярные бренды

LumiraDx SARS-CoV-2, Руководство пользователя

Результаты поиска

Содержание SARS-CoV-2

Отзывы:

Похожие инструкции для SARS-CoV-2

Бренды по названию

Популярные бренды