Lufft CHM 15k Nimbus, Руководство пользователя

Страница: 85 / 101

DataClient - Terminal software for CHM 15k
Revision R09, November 2016 85
start /B %CHMDIR%\DataClient.exe -device 16 -com COM1 -baud 3 -ncpath
%TEMP%\uudecode.nc -measurepath %MPATH% -startseq 7 -utcupdaterate 6 -
instrument 1 -filestructure 0 -nostartdialog 1
Remark: start... command without linebreaks!)
It is important that the current internal baud rate of the CHM 15k (set in previ-
ous sessions) must coincide with the baud rate in this command line, in this
example value 3 means 9600 baud. Otherwise connection failures will occur, see
chapter 11.3 (start dialog). In this example the CHM PC clock is synchronized
every 6 hours.
DataClient can be invoked with one or more of the following command
line parameters:
l
–baud <index> :
Possible values of <index> can be 0 (1200 baud), 1 (2400 baud), 2 (4800
baud) , 3 (9600 baud, default) , 4 (19200 baud) , 5 (38400 baud) , 6 (57600
baud) or 7 (115200 baud).
l
–com <port> :
Usually <port> is one of the serial ports ASRL1::INSTR (default),
ASRL2::INSTR, and so on. Depending on the Labview environment on the
host PC, the alternative names COM1, COM2 may be available too.
l
–device <number> :
The default value is 16, suitable for the factory default RS485 number of a
CHM15k.
l
–measurepath <path> :
<path> specifies the main directory of locally saved raw data telegrams
(NetCDF). Default <path> is D:\Measure
l
–ncpath <filename> :
<filename> specifies the full qualified filename (i.e. including path) of a
required temporary NetCDF file for the decoding of raw data telegrams.
Therefore the user must have read and write access to this path. Default
<filename> is C:\WHM\uudecode.nc
l
–utcupdaterate <hours> :
Any positive value means that the internal CHM PC clock is synchronized
with the client PC clock (converted to UTC) every <hour> hours. Default
value for <hour> is 0, i.e., no synchronization is done.
l
– startseq <number>
Defines a list of parameter queries in the start up process of the software.
“7” queries all parameter values t(ransfermode, logging time and fabname).
l
–instrument <number>
Parameter changes the type of the instrument, e.g. changes the service text
of status codes. The default number for Nimbus systems is “1“ and for old
CHM 15k systems “0“.
l
–filestructure <number>
Telegram files and NetCDF files are saved with a specific file structure and
number of files in the predefined directory: “0” means a daily files is gener-
ated, “1” hourly files and “2” 15 minute files are generated.