Lufft CHM 15k Nimbus, Руководство пользователя

Страница: 79 / 101

DataClient - Terminal software for CHM 15k
Revision R09, November 2016 79
The four input fields on the left side should be filled with appropriate values. If
the current baud rate of the connected CHM 15k is unknown, then use the value
“9600, which is the default baud rate. A higher baud rate, eg. 38400, is recom-
mended for raw data transfer and could be changed later on, see top figure 32.
If you poll the CHM 15k many times with an incorrect baud rate the CHM 15k
will automatically set its baud rate to the “BaudrateAfterError” value, which is
also predefined to 9600 Baud, after one logging interval.
To go on:
– With “Cancel” the program terminates.
– With “Continue” the program will enter normal operation mode with five
pages, which are explained in the following sections.
11.4 Communication tab
Fig. 32: Main page “Communication”, where all actions are carried out. The
remaining four pages serve the monitoring of the measuring data as well
as service information.
All control elements are placed on the left side of the page. Responses of the