The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-12
Administering the 8405, 8410, and 8411 Voice Terminals
5
NOTE:
With G3V3 and later switches, the system can download BLANK softkey
labels for positions where there are no features administered.
The 12 softkey features on the 8405D, 8405D Plus, 8410D, and 8411D should be
administered in the following manner:
■
If the 8405D, 8405D Plus, or 8410D is connected to a DEFINITY G3V3
(or later), or if the 8411D is connected to a DEFINITY G3V3 or G3V4,
Issue 1 or 2, administer either of the voice terminals as an 8410D. An
8411D voice terminal connected to a DEFINITY G3V4, Issue 3 (or later)
can be administered as itself. In any of these cases (that is, if the voice
terminal is connected to a G3V3 or later), the system manager may choose
to leave the default softkey features in place (see “The Default Softkey
Features on the 8405D, 8405D Plus, 8410D, and 8411D” on the next page)
OR select features from the list of alternative softkey features (see
“Alternate Softkey Features on the 8405D, 8405D Plus, 8410D, and
8411D”). Administer the softkey features on “SOFTKEY BUTTON
ASSIGNMENTS” Buttons #1 through 12.
■
If the 8405D, 8405D Plus, 8410D, or 8411D is connected to a
System 75, DEFINITY G1, or DEFINITY G3V2 (or earlier), administer the
voice terminal as a 7405D + Display Module. Only the default softkey
features can be used. (See “The Default Softkey Features on the 8405D,
8405D Plus, 8410D, and 8411D” on the next page.) Administer the 12
softkey features on “FEATURE BUTTON ASSIGNMENTS” Buttons #2
through 13. (The Normal feature should be administered on Button #1 on
this administration screen.)
Alternate softkey features (to replace default softkey features),
international transmission levels and parameters, and A/Mu Law
companding can be administered and supported ONLY on a terminal
connected to a G3V3 or later.
!
CAUTION:
It is not recommended nor will it be supported for anyone to
administer alternate softkey features, international transmission levels
and parameters, and A/Mu Law companding on a terminal from a
G3V3 switch and subsequently connect this same terminal to an
earlier switch release, such as a DEFINITY G3V2, G2, G1, or a
System 75 or System 85. Any problems in the functionality or in
readministration of this terminal will be the responsibility of the
customer, not Lucent Technologies.
