The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Programming the Options
Page 7-9
7
3. Enter the 2-digit code, “42” (“IC”).
■
The red light next to
f
lutters.
■
The current setting (either T/R ON I1 CHANNEL or T/R ON I2
CHANNEL) is shown on the display, if there is one.
4. Press either “1” or “2” to change the setting:
— Press “1” to select the I-1 Channel for Analog Adjunct transmission
— Press “2” to select the I-2 Channel for Analog Adjunct transmission
or if the voice terminal has a display, press
to change the
setting. Press
to save the desired option and then exit
programming.
■
After pressing “1” or “2” or pressing “#”, the light next to
goes off and one of the following voice terminal
responses occurs:
If the voice terminal saves your selection, the first three green
call appearance lights go on and, if you have a display, a
confirmation message is displayed.
If the voice terminal cannot save this selection, the first three
red call appearance lights go on and, if you have a display, an
error message is displayed. In this case, the selected option
will be in effect until power is removed from the set. If this
happens, try repeating the process. If the option still cannot
be saved, the terminal may be faulty.
Setting the Audio Volume Control (on the 8411)
The 8411 sets will support the following set of audio volume control features for
the handset and speakerphone.
■
The speakerphone and handset volume remains at its current setting until
the user changes it (that is, the volume level does NOT revert back to its
mid-range volume after each call) (this is the default setting)
■
The speakerphone and handset volume reverts back to its mid-range level
after each call
■
The handset volume is fixed at a mid-range volume setting, and the
speakerphone volume remains at its current setting until the user changes
it (that is, the speakerphone volume does NOT automatically revert back to
its mid-range level after each call)
■
The handset volume level is fixed at a mid-range volume setting, and the
speakerphone volume reverts back to its mid-range level after each call
To set the audio volume control for the handset and the speakerphone:
1. While on-hook, press
.
Shift
*
#
Shift
Shift
