The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-22
Administering the 8434DX Voice Terminal
5
Administering the 8434DX Voice
Terminal
Use the following table to administer the 8434DX voice terminal:
The voice terminal can be administered so it can access the softkey features OR it
can be administered so that it has access to more coverage buttons.
Key to Abbreviations:
+D = with Display Module
+F = with Feature Key Module
CAVEATS:
The 8434DX may be aliased as a 7405 +D +F to support features on all systems.
However, in this case, while all the call appearance/feature buttons AND the
softkey features will be functional, there can be a maximum of only 10 call
appearances. On the 7405, the Display Module is a 1-line display, and thus the
1-line display option should be selected.
On some systems, the 8434DX can be aliased as a 7434 +D or a 7444 to support
coverage. In this case, there can be up to 34 call appearances (including bridged
Table 5-9.
Administering the 8411D Voice Terminal
If you have this System
and this
Release
(which can
support this
type of
operation)
Administer the
8434DX as a
System 75
R1V1 —
R1V3
4-wire only
7405D +D +F
System 85
R2V2 —
R2V4
4-wire only
7405D +D +F
International System 75
IR1V4, etc.
4-wire only
7405D +D +F
DEFINITY G1
4-wire only
7405D +D +F
Global DEFINITY ‘91
4-wire only
7405D +D +F
or 7434 +D
DEFINITY G2V1 and
DEFINITY G2V2
4-wire only
7405D +D +F
or 7434 +D
DEFINITY G3i, G3r, G3s,
G3vs
4-wire only
7405D +D +F
or 7434 +D
DEFINITY G3V2
2- or 4-wire
7405D +D +F
or 7444
DEFINITY G3V3 or later
(including the DEFINITY ECS)
2- or 4-wire
8434D
