The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-24
Administering the 8434DX Voice Terminal
5
Administering Softkey Features on the 8434DX
On the 8434DX, up to 15 softkey features can be administered on the three
feature option screens (five features on each screen). When the voice terminal is
shipped from the factory, there are 15 features already assigned to the feature
option screens; their feature abbreviations appear on the second line of the
display, such as the following:
If this feature option screen appears on a user’s voice terminal display, the user
would press the softkey below LWC in order to activate the Leave Word Calling
feature or press the softkey below AutCB to use the Automatic Callback feature.
When the feature is activated, an arrow (
) appears above the feature
abbreviation.
NOTE:
With G3V3 and later switches, the system can download BLANK softkey
labels for positions where there are no features administered.
The 15 softkey features on the 8434DX should be administered in the following
manner:
■
If the 8434DX is connected to a DEFINITY G3V3, administer the voice
terminal as an 8434. In any of these cases (that is, the voice terminal is
connected to a DEFINITY G3V3 or later), the system manager may choose
to leave the default softkey features in place (see “The Default Softkey
Features on the 8434DX” on the next page)
OR
select features from the list
of alternative softkey features (see “Alternate Softkey Features on the
8434DX”). Administer the softkey features on “SOFTKEY BUTTON
ASSIGNMENTS” Buttons #1 through 15.
■
If the 8434DX is connected to a System 75, System 85, a DEFINITY G1,
G2, or G3V2 (or earlier), and you want to use the softkey features,
administer the voice terminal as a 7405D + Display Module and Feature
Key Module. (If you administer the voice terminal as a 7434 or a 7444, you
cannot use the softkey features.) Only the default softkey features can be
used. Administer the 15 softkey features on “FEATURE MODULE
BUTTON ASSIGNMENTS” Buttons #1 through 15. (The Normal feature
should be administered on Button #1 on the “DISPLAY BUTTON
ASSIGNMENTS” screen.)
For example, for the features on the default feature option screen on the
previous page, the Leave Word Calling feature would be administered on
“FEATURE MODULE BUTTON ASSIGNMENTS” Button #1; the Automatic
Callback feature would be administered on Button #4.
LWC CnLWC Cnslt AutCB Timer
