The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-8
Administering the 8405, 8410, and 8411 Voice Terminals
5
When administering an 8405B on the DEFINITY G3 or G4, you must select
“One-Way” or “None” as the Speaker option on the 8410 Administration Form. If
the voice terminal is incorrectly optioned as having a two-way speakerphone, the
light next to the Speaker button will continually flutter. In that case, you must
readminister the terminal.
NOTE:
As noted in the above table, an 8410D aliased as a 7405 voice terminal
must be administered as a 7405 +D, that is,
with Display Module
. On the
administration page, type a “y” (for Yes) on the blank next to “Display?”
The 8410D can be administered as itself ONLY IF it is connected to a
DEFINITY G3V3 (or later) switch. Native support for the 8405 sets can be
done only with a DEFINITY ECS Release 5 (G3V5).
When administering an 8405D on the DEFINITY G3 or G4, you must select
“One-Way” or “None” as the Speaker option on the 8410 Administration
Form. If the voice terminal is incorrectly optioned as having a two-way
speakerphone, the light next to the Speaker button will continually flutter. In
that case, you must readminister the terminal.
Table 5-4.
Administering the 8405D, 8405D Plus, and 8410D Voice Terminals
If you have this System
and this
Release
(which can
support this
type of
operation)
Administer
the 8405D,
8405D Plus,
and 8410D as a
System 75
R1V1 —
R1V3
4-wire only
7405D +D
System 85
R2V2 —
R2V4
4-wire only
7405D +D
International System 75
IR1V4, etc.
4-wire only
7405D +D
DEFINITY G1
4-wire only
7405D +D
Global DEFINITY ‘91
4-wire only
7405D +D
DEFINITY G2V1 and
DEFINITY G2V2
4-wire only
7405D +D
DEFINITY G3i, G3r, G3s,
G3vs
4-wire only
7405D +D
DEFINITY G3V2
2- or 4-wire
7405D +D
DEFINITY G3V3 or later
(including the DEFINITY ECS)
2- or 4-wire
8410D
