Lucent Technologies PortMaster, Руководство по настройке

Страница: 170 / 364

Configuring General Settings
11-2 PortMaster Configuration Guide
Command> show Line0
Configuring Line Use
You can use a line as a single E1 or T1 line, as PRI B channels, as fractional E1 or T1
lines divided into channel groups, or for inband signaling for channelized T1.
Note – T1 and E1 lines require an external clock signal provided by the device to which
the PortMaster is connected, or by the telephone company network.
To configure a line, use the following command. Table 11-1 explains the line use
options.
Command> set Line0 isdn | t1 | e1 | fractional | isdn-fractional | inband
You use the fractional keyword in this command to break up a channelized T1 line
into groups. The isdn-fractional keyword refers to PRI only.
Setting Channel Groups
You can divide the channels of a T1 or E1 line into numbered groups after the line type
has been set to fractional with the
set
Line0
fractional command.
To set the channel group for a T1 or E1 line, use the following command. Table 11-1
explains the channel group options.
Command> set Line0 group Cgroup | none channels Channel-list
Table 11-1 Channel Group Options
Option Description
Line0 Line0 or Line1.
Cgroup Group number from 1 to 63, or none to unassign
channels.
Channel-list Space separated list of one or more channel numbers, from
1 through 24 for T1, or 1 through 30 for E1. The channel
numbers do not have to be contiguous.
✍