Lucent Technologies PortMaster, Руководство по настройке

Страница: 142 / 364

Testing Your Location Configuration
8-14 PortMaster Configuration Guide
Testing Your Location Configuration
When you are configuring a location, you can set a manual connection for the location
so that you can test the configuration before resetting the connection to on-demand or
continuous. To test the configuration, you must initiate a connection with the remote
location by using the
dial command from the command line.
To display the chat script (if you are using one) during dialing, use the optional -x
keyword. You can watch the connection process to ensure that location-specific settings
are configured correctly. This keyword also resets some debugging values previously set
with
set debug .
When your location is configured correctly, change the connection type from manual to
continuous or on-demand.
To test your configuration, use the following command:
Command> dial Locname [ -x ]