Lucent Technologies PacketStar PSAX 4500 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 722

Lucent Technologies PacketStar PSAX 4500 Скачать руководство пользователя страница 92

Chapter 3 System Features

Network Management

3-24

255-700-239

PacketStar

®

PSAX 4500 Multiservice Media Gateway User Guide

, Issue 2

Release 8.0.0

•

In-band management by using a PVC connection over an ATM wide-area
network (WAN).

The in-band management feature on the CPU module allows a user to
access and manage one or more PSAX systems (managed targets) via a sin-
gle PVC connection from a management workstation (management host)
running an SNMP client over an ATM WAN. This allows for IP-based func-
tions (that is, telnet) and SNMP functions (that is, element and network
management software) to be performed remotely using ATM virtual cir-
cuits, which terminate within the managed node. The PVC/SVC connec-
tion is set up using an I/O module with an ATM cell bearing port (for
example, the OC-3c, STM-1, DS1, DS3, E1, and E3 modules). Three basic
types of configuration are possible:

•

Direct connection

•

Routed connection

•

Hybrid connection

For more information on these three basic connection types, see the
appendix, “Configuring In-band Management.” For more information on
configuring in-band management SVC connections, see Chapter 4, “Site-
Specific Configuration.” For more information on configuring in-band
management PVC connections, see the appropriate

PacketStar

PSAX Module

User Guide

.

AQueView

®

Element Management System

The

Navis

™

AQueView

®

Element Management System (EMS) software is a

GUI-based element management tool that is used to provision the

PacketStar

®

PSAX 1000, PSAX 1250, PSAX 2300, and PSAX 4500 Multiservice Media
Gateway systems. The

AQueView

EMS enables a network of PSAX devices to

be managed and provisioned from a single location, using easy-to-use win-
dows. The

AQueView

EMS also provides centralized configuration, diagnostic,

performance, and security management of PSAX systems.

Release 6.0 supports the same software features supported in the PSAX sys-
tem software Releases 8.0.

n

, 7.1.

n

, and 7.0.

n

. The

AQueView

EMS is available

in two versions:

•

Client/Server application:

~

The Client and server can be installed on Sun Solaris platforms with or
without HP OpenView NNM

~

The Client alone can be installed on Sun Solaris platforms with HP Open-
View NNM

~

The Client alone can be installed on Windows NT, Windows 2000, and
Sun Solaris platforms without HP OpenView NNM

•

Standalone application:

Can be installed on Windows NT, Windows 2000, and Sun Solaris plat-
forms without HP OpenView NNM

For more information on

AQueView

R6.0 functionality, refer to the following

documents:

«
...
90
91
92
93
94
...
»

Содержание PacketStar PSAX 4500



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов