Lucent Technologies PacketStar PSAX 4500, Руководство пользователя

Страница: 629 / 722

255-700-239 C-11
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide , Issue 2 Release 8.0.0
Appendix C Configuring In-Band Management
Using the Hybrid Connection Configuration
Begin
1
In the hybrid connection type, Ethernet to in-band network routing as
well as ATM channel tunneling is used. Log in as root on the SUN
machine and add a routing table entry using “route add” command:
route add net In-Band network address PSAX IP address on Ethernet metric
where the in-band network address = 20.0.0.0
PSAX IP address on Ethernet = {Check Site Specific Configuration - Site
Specific Configuration - IP AddrPSAX systemess on the main router
PSAX system [ node A]}
metric = 10
2
In this configuration, only one PSAX system can act as the router to
channel traffic from Ethernet to the in-band network. This is the main
router PSAX system. The main router PSAX system has direct ATM con-
nections to all remote PSAX systems. (These connections may be tun-
neled through a number of switches.)
3
On the main router PSAX system, the in-band management interface
(primary) should be assigned an IP address that is on a different network
than that of its Ethernet interface.
4
For all the PSAX systems except the main router PSAX system, the Ether-
net interface IP network should be different from the SUN machine’s
Ethernet interface IP network.
5
All of the NMS stations should be in the one IP network, but can be in
different subnets connected to the main router PSAX system via Ethernet
or OC3-ATM connections.
6
All the end system and router PSAX system in-band interface IP
addresses may or may not be in the same IP network. For each different
IP network, a route should be configured on each of the NMS station
(SUN machine) to use the main router PSAX system as gateway to that
network. (The metric should be set to 2).
7
The default gateway can be configured on the remote PSAX system to
use the main router PSAX system as a gateway.
8
The main router PSAX system should be configured with in-band con-
nections to each of the remote PSAX systems.
9
The remote PSAX system should have only one connection to the NMS
station’s network and the appropriate mask if the main router PSAX sys-
tem is not used as default gateway by the remote PSAX system.
10
If the main router PSAX system is used as a default gateway by the
remote PSAX system, then the remote PSAX system should have only
one in-band connection to the main router PSAX system, the in-band IP
address.
End