Lucent Technologies PacketStar PSAX 4500 Скачать руководство пользователя страница 491

Страница: 491 / 722

255-700-239

A-35

PacketStar

PSAX 4500 Multiservice Media Gateway User Guide

, Issue 2

Release 8.0.0

Appendix A SNMP Trap Messages

Viewing Trap Log Information

snmpCommuni-
tyString-
sChangedToPub-
licNotify

System
Event, 30

Critical

< NO OBJECTS >

An error has been detected
in the agt.pty file and the
community strings have
been changed to be public.

Possible Cause:

This may be caused by corruption in the agt.pty file.

Corrective Action:

Using the Console interface, log onto the PSAX system and

verify the ReadWrite community string. Try reapplying the correct string, since
this may recreate the agt.pty file.

softwareDown-
loadStatusNotify

System
Event, 10

Information

upgradeSwCopyStatus,
upgradeSwErrorStatus

The completion status of the
FTP download of a software
upgrade.

stratumActivi-
tySwitchOverNo-
tify

Module
Event, 10

Information

activeStratum

The secondary stratum mod-
ule is active and has become
the primary module

stratumCardMis-
matchNotify

System
Event, 48

Critical

< NO OBJECTS >

The secondary stratum mod-
ule does not support this
mode of operation being
applied to the primary stra-
tum. The module must be
upgraded.

Possible Cause:

Critical: Indicates that the secondary Stratum 3–4 module does

not support this mode of operation being applied to the primary Stratum 3–4
module. The module must be upgraded.

Corrective Action:

Check that the standby Stratum 3–4 module is the same

model as the primary, verifying the PEC and the installed chipset on the Stratum
3–4 module.

stratumConfig-
ModifyFailNotify

Module
Event, 14

Information

stratumConfigModify-
FailureReasonCode

An attempt to modify the
stratum configuration has
failed.

stratumMo-
deChangeNotify

System
Event, 8

Information

stratumMode, stratum-
BackupMode

The current operational sta-
tus of the Stratum 3–4 mod-
ule has changed as indicated
by the stratumMode MIB
object.

Table A-2. SNMP Trap Names and Descriptions with Associated MIB Object Names (Continued)

Enterprise-Specific

Trap Name

Trap Group

and

Trap Index

Number

System

Indicator for

the Trap

MIB Object Name

Trap Description

Содержание PacketStar PSAX 4500

















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PacketStar PSAX 4500

Отзывы:

Lucent Technologies PacketStar PSAX 4500, Руководство пользователя, Страница: 491 / 722

Результаты поиска

Содержание PacketStar PSAX 4500

Отзывы: