Lucent Technologies PacketStar PSAX 4500, Руководство пользователя, Страница: 410 / 722

Chapter 10 Backing Up and Restoring PSAX System Files
Backing Up System Database Files
10-6 255-700-239
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide , Issue 2 Release 8.0.0
Backing Up Database Files Using FTP
To back up your PSAX system database files to a separate storage medium,
such as a network management workstation, using FTP, perform the steps in
the following procedure.
Begin
1 Determine which network management workstation (computer) you
will use to store your backup PSAX system database files, and set up a
specific directory for these files.
2 Connect a standard 10Base-T Ethernet cable to the Ethernet port on the
primary CPU module in the PSAX system, and then connect the other
end to your network. Ensure that you have a stable connection from the
network management workstation to the CPU module.
3 On the workstation, at the DOS prompt, enter:
ftp -n xxx.xxx.xxx.xxx
where
4
At the prompt
ftp
, enter the following command:
user readwrite currentpassword
where
currentpassword is the password you have defined for the PSAX system.
5
To specify the correct path for the location of the configuration database
files you are backing up from the PSAX system, enter the following com-
mand:
cd /scsi/current (Windows) or cd \scsi\current (UNIX)
6
To provide a visual indicator during the backup process, enter:
hash
7
To transfer (back up) the configuration files, enter the following com-
mands in sequence:
Note:
When you are entering get commands for each individual con-
figuration file listed below, an error message might be displayed
stating that the particular file does not exist. In this situation, the
error message would be displayed because you did not use a par-
ticular feature that would have created that file on your system.
bin
get filename
where
filename is the one of the following configuration files on your PSAX
system.