Lucent Technologies PacketStar PSAX 4500 Скачать руководство пользователя страница 196

Страница: 196 / 722

Chapter 5 Site-Specific Configuration

Configuring N:1 Protection Groups

5-62

255-700-239

PacketStar

PSAX 4500 Multiservice Media Gateway User Guide

, Issue 2

Release 8.0.0

Field Descriptions

Enter values in the fields on this window according to the information
provided in Table 5-20.

Command

Function

Apply the Command

Applies the command you have selected
in the Command field.

Refresh Display

Updates the values for the fields in this
window.

Go Back to Previous Screen

Redisplays the N to M Protection Table
window.

Table 5-20. Field Descriptions for the N to M Protection Configuration Window

Field Names

Field Values

Description

Slot Id

Default:

N/A

Range: 1–15

Format: Numeric

Displays the number of the selected module slot
in the chassis. To make another selection, type
the slot number in this field and select the

Refresh Display

command.

Command

Default:

N/A

Range: N/A
Format: Predefined
alphanumeric

Indicates the selectable commands used to
control the protection feature on the selected slot.

None

Indicates that no command is enabled for the
selected slot.

Clear

Forces traffic back to the working module slot.

Note:

ForcedSwitchOver
ToProtection

Forces traffic to the protection module slot.

[Switchover Slot
Id]
(display only)

Default:

Range: 1–15

Format: Numeric

Displays the slot number of the module that traf-
fic is transferred to during a protection switcho-
ver. The value

indicates that no valid

switchover slot exists at this time.

[Config Mode]
(display only)

Default:

None

Range: N/A

Format: Predefined
alphanumeric

Displays the protection configuration status of the
selected slot.

None

Indicates that the selected slot is not configured.

Working

Indicates that the selected slot is configured as a
working module.

Protection

Indicates that the selected slot is configured as a
protection module.

[Group Id]
(display only)

Default:

N/A

Range: 0–15

Format: Numeric

Displays the number assigned to the protection
group associated with the selected slot.

Содержание PacketStar PSAX 4500

















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PacketStar PSAX 4500

Отзывы:

Lucent Technologies PacketStar PSAX 4500, Руководство пользователя, Страница: 196 / 722

Результаты поиска

Содержание PacketStar PSAX 4500

Отзывы: