LTT SLC-M+ Series, Руководство пользователя

Страница: 98 / 113

Chapter 3 Operation
97
3.8 CCD Jobs Description
There are four types of jobs for user to use for SLC-M+ cutting with
CCD. These jobs are special design for AutoCCD. Please note the
version compatibility between jobs and AutoCCD.
Job Function
LTT_Pattern-1-200.job It works for single pattern. CCD will find the matched
pattern in the field of view. It will output the defined
position if the matched pattern is over the accept
thresh.
LTT_Pattern-2-200.job It works for both single pattern and two different
patterns.
LTT_Circle-1-200.job It works only for single circle pattern.
Calibration_Circle_200.job It works for CCD calibration about FOV and CCD
Shift.
3.8.1 Single Pattern Job
AutoCCD use CCD to find reference marks in the material and calculate
the position difference and rotate angle. If these reference marks are
the same, then you can use this job. It works for single pattern. CCD
will find the matched pattern in the field of view. It will output the
defined position if the matched pattern is over the accept thresh.
Job Name : LTT_Pattern-1-200.job
Name Descriptions
Model Region
Press this button; you can train the pattern that you
want.
You can save the job setting as a <admin> user. For
<operator> user, the job setting can not be saved.
Ver. J2.00 This is the version of the job file.